NEATEL's MPO/MTP multi-fiber jumpers deliver the performance and reliability needed in todays demanding high-speed broadband and data networks. NEATEL's MPO/MTP jumpers utilizes precision ferrules, precise housing dimension and metal guide pins to ensure fiber positioning when mating and give excellent performance. It was tested by Telcordia for compliance with GR-1435, Verizon TPR.9431, IEC-61754-7 and EIA/ TIA-604-5.
12F MTP Female - LC Singlemode OS2 Fiber Optic Breakout Cable
This kind of connector is designed for next generation 200/400G transceiver QSFP-DD and OSFP, meeting the requirement for CWDM4, FR4, LR4 and SR2. The reduced size CS connector is not only capable of delivering low insertion and high return loss comparable to existing LC connectors, but it does so with a reduced footpr……
The MPO / MTP® module box is pre-termianted to increase the installation speed. The module box and the external MPO / MTP® port can be easily and efficiently connected to the main line. A single MPO / MTP® provides instant connection to 24 fibers.
400G OSFP DD SR4 Optical Transceiver Module
MPO Pre-Terminated 24F OM3 Aqua LSZH Fiber Optic Cable With Pulling Eye
Pre Terminated 96 Cores MPO Extension Fiber Optic Trunk/Backbone Cable, Polarity C, Multimode OM3, Aqua
5.0mm 12F MTP Male to MTP Male Multimode OM3 Fiber Optic Trunk Cable
8F MTP Pinned - 4xDLC Multimode OM3 Aqua Fiber Optic Harness Cable
24F MTP Pinned -LC Multimode OM3 Aqua Fiber Optic Harness Cable
NEATEL MTP® to ST staggered harnesses provide breakout from 12-fiber MTP connectors to 12 x ST connectors. These harnesses are available in six stagger configurations to meet various port-replication needs. Stagger options replicate the specific switch po
NEATEL MTP® to ST staggered harnesses provide breakout from 12-fiber MTP connectors to 12 x ST connectors. These harnesses are available in six stagger configurations to meet various port-replication needs. Stagger options replicate the specific switch po
NEATEL MTP® to ST staggered harnesses provide breakout from 12-fiber MTP connectors to 12 x ST connectors. These harnesses are available in six stagger configurations to meet various port-replication needs. Stagger options replicate the specific switch po
NEATEL MTP® to LC staggered harnesses provide breakout from 12-fiber MTP connectors to 12 x DLC connectors. These harnesses are available in six stagger configurations to meet various port-replication needs. Stagger options replicate the specific switch p
NEATEL MTP® to LC staggered harnesses provide breakout from 12-fiber MTP connectors to 12 x DLC connectors. These harnesses are available in six stagger configurations to meet various port-replication needs. Stagger options replicate the specific switch p
NEATEL’s MPO/MTP® trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centres and other high fibre environments reducing network installation or reconfiguration time and cost.
This cable is factory made, quality controlled fibre optic assembly is specified for short internal optical links. The 2.0mm presentation lends itself to installation within a patch panel, wall box or Optical Distribution Frame (ODF). Crush resistant protective tubing assures secure transportation and installation. The……
The single-mode and multimode MPO/MTP® products are multi fiber connectors used in high density backplane and Printed Circuit Board(PCB) applications in data and telecommunications system. The MPO connector offers up to 24 times the density of standard co
NT990 is MPO/MTP® pre-terminated ultra-high density wiring box, 19 inches, 1U height reaches 96 cores, can be applied to data center, computer room, computer center and other high-density wiring places, front and rear removable upper cover, pull-out double the use of guide rails, detachable front bezels, ABS lightweigh……
12/24 f.o. MPO/MTP® Trunk cable facilitates a rapid deployment in high density environments. Used to interconnect MPO/MTP® cassettes and panels with the active ……
12/24 f.o. MPO/MTP® Trunk cable facilitates a rapid deployment in high density environments. Used to interconnect MPO/MTP® cassettes and panels with the active ……
NEATEL's patch panel mounts up to 16 x 24FMPO/MTP® cassettes in a 19" arrangement taking only 4U height. The Patch Panel has a sliding tray to provide easy access, connection and securing of the MTP® Trunk Cables to the rear of the cassettes. Blank panels are included for the unused apertures within the patch panel. Th……
NT989 is MPO/MTP pre-terminated ultra-high density wiring box, 19 inches, 1U height reaches 144 cores, can be applied to data center, computer room, computer center and other high-density wiring places, front and rear removable upper cover, pull-out double the use of guide rails, detachable front bezels, ABS lightweigh……
The single-mode and multimode MPO/MTP® products are multi fiber connectors used in high-density backplane and Printed Circuit Board(PCB) applications in data and telecommunications system. The MPO connector offers up to 24 times the density of standard connectors, providing significant space and cost savings. MPO patch……
NEATEL's MTP® trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centres and other high fibre environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or MTP® fanouts. MTP® trunk assemblies are offered……
